This LCD Throttle Plug and Play Display for Cruiser is the latest throttle for the original EMOVE Cruiser Electric Scooter

Old version VS new version ,software same ,48v/52v all same , just appearance is different，but new version more better for waterproof .

Compatible with the latest EMOVE Cruiser and EMOVE TORING. This is the plug and play module

To switch out the LCD Throttle Plug and Play Display for Cruiser, simple remove the 4 mini screws at the back, unplug the old throttle with your new throttle. Calibrate the throttle according to your scooters' voltage.

Emove cruiser Calibration Instructions

• P0: wheel diameter,Default is 10
• P1:430
• P2:17
• P3:0
• P4: Km/h (0) | mp/h (1)
• P5:Throttle Accelerator Start (0) | Kick-Start (1)
• P6:Cruising Mode Setting,Turn on (1) | Turn off (0)
• P7:Pick Up Speed ,Strong Pick Up (0) | Soft Pick Up (1)
• P8:Max Speed Setting 1~100%,100 means full speed
• P9:Electric Brake Strength,Off (0) | Medium (1) | Hard (2)

Emove Touring Calibration Instructions 

• P0: wheel diameter,Default is 8
• P1:415
• P2:17
• P3:0
• P4: Km/h (0) | mp/h (1)
• P5:Throttle Accelerator Start (0) | Kick-Start (1)
• P6:Cruising Mode Setting,Turn on (1) | Turn off (0)
• P7:Pick Up Speed ,Strong Pick Up (0) | Soft Pick Up (1)
• P8:Max Speed Setting 1~100%,100 means full speed
• P9:Electric Brake Strength,Off (0) | Medium (1) | Hard (2)